ICBT FTF 12 E2 AD FALSE TWIST DRAW TEXTURING MACHINE – 2 pcs Year: 1997 / 1999 NUMBER OF POSITIONS : 96 and 16 MINIMUM MECHANICAL SPEED (This is not a process speed) : 400 m/min MAXIMUM MECHANICAL SPEED (This is not a process speed) : 1200 m/min SUPPLY -DIAMETER/TRAVERSE OF FEEDING : 440/170 -BOBBINS : 360/250 -ACCORDING TO THE CREEL : 250/300 YARN DELIVERY SHAFT -NUMBER : 3 TEXTURING HEATER -TEMPERATURE :100 – 180 °C -LENGTH : 2.5 m COOLING ZONE -TOTAL LENGTH :1.5 m -LENGTH OF THE COOLING PLATE : 1.234 m MOTORIZED SPINDLE -ROTATING SPEED :16000 RPM SETTING HEATER -LENGTH : 1,2 m -TEMPERATURE : 120 to 250 ° C TAKE-UP -BOBBIN TRAVERSE : 250 mm -MAXIMUM DIAMETER : 300 mm -END CAPS FOR TUBES TYPE : CARDBOARD MAIN POWER SUPPLY ELEVATION TENSION :400V FREQUENCY : 50-60 Hz Draw texturing machine FTF 12E-2, specially designed for highly flexible production plants, consisting of two independent sides of positions, i.e. 6 sections of 8 friction texturing spindles per side. Compact design, double heater, with straight yarn path in the texturizing zone giving a high flexibility for the texturing of PP 22 to 330 dtex, filament yarns. Linear mechanical speed: from 400 to 1200 m/min Machine consisting of: -One double-sided central loom; each side with one side of 6 modules of 8 positions. This central loom includes the headstocks, the spindles, the intermingling devices and the 2-deck take-ups -2 lateral structures (one per side) including the cooling plates and the heaters connected to supply creel. -Textile service, thread-up, and doffing are pneumatically assisted and performed by the operator from the floor -Settings are monitored through the central computer. Real time display of setting parameters on the monitor. Settings are memorized. -Possibility to run two different yarns under different settings per machine side. -Several devices such as discs and twist stops to be adapted according to the type of yarn processed to the count and to the denier per filament.