MARGASA rag recycling line

Rag recycling line:

1 LIDEN brand circular cloth cutter, model CRS, from 1995, 500mm. Delaware Useful width and 2 blades, with 6 m entrance gate. and output of 2 m. PVC ambassadors.

1 devil brand MARGASA TN-1000 of 1m. useful width, 6 drums.

Feed conveyor and return conveyors, recycling circuit for material that has not been fully open.

Six drums 1,000 mm wide and φ 1,000 mm dynamically balanced and exactly the same, with the following characteristics:

Feeding through a 150 mm diameter slotted (milled) steel cylinder that works with a pressure that can be adjusted at will, in crescent blade with a profile angle special.

A control unit designed to check if the material has been opened in the correct way,

adjustable during the work process according to each type of material, so that the cloth that does not

has opened enough it can be recycled, falling on the teleras that boost it again. a

the entrance of the machine.

A condenser system, consisting of a 400 mm diameter perforated cylinder with suction

internal on both sides and two cylinders for the delivery of the material, one engraved and the other fluted.

A fan to suck the dust from each condenser.

A 3 KW motor-reducer driven by an inverter moves the feeding group.

Aluminum bars (staves) and nails. Special density of nails to produce high quality fiber to make open-end threads.

Power:

1 Motor 55 kW for the 1st drum

2 Motors 45 kW for the 2nd and 3rd drums.

3 Motors 37 kW for the 4th, 5th and 6th drums

6 Motors for the input groups (4x 4 kW geared motors and 2x 3 kW PIV) Installed power: 278 kW Total Power consumption: 180 kW / h.

Fed with a charger with silo brand MARGASA mod. CCS-1000 of 1,000 mm x 870 mm. and high 1,870 mm.

The upper part has a perforated plate that acts as a filter, separating the air from the material. Material level check windows and peepholes.

Accumulator with horizontal flap that moves the material towards the vertical spiked flap. It unloads the material in the dispenser, which includes a compactor to avoid blockages and two delivery grooved cylinders that feed the breaker that regulates the thickness of the scraps.

Platform and ladder with safety rails for inspection.

3 Motor-reducers controlled by electronic inverters.

Installed power: 2.76 kW.

Load control in the Silo chamber and in the feed hopper by means of four photoelectric cells with timers.

1 FARELL brand press of 60Tm. with accumulator and raised telera from the 6th drum. For bales of 250-300Kg. with tie of 9 wires x 2.

22Kw hydraulic system. and 4Kw. Total installed power 26Kv